Questo contenuto è attualmente disponibile nella sua lingua originale.
Fluence LED Dimmer Controller
Modello / SKU: C-W-U
Setting Intensity With the Fluence LED Dimmer Controller
- Input Power
- 120V AC, 60 Hz
- Dimensions
- 3.92 in L x 3.43 in W x 1.35 in H
- Dimming Signals
- 0-10V ±0.1V or PWM 0-100% ±1%
- Dimming Range
- 0-100% light intensity
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Setting Intensity With the Fluence LED Dimmer Controller
Product details
- A dimmer is the part of a Fluence room that most growers bolt on after the fixtures are already hanging.
- This one is a single-channel wall unit outputting either a 0-10V analog signal or a PWM signal, set by a switch on the housing.
- It leaves the factory pre-set to the analog signal, so a room running Fluence drivers works on first power-up without anyone touching that switch.
- Intensity covers the full 0 to 100% range and the digital readout shows the number rather than a vague dial position.
- Source and sink current is rated at 40 mA DC, and that current is what caps the chain.
- Fluence now puts the recommended ceiling at 25 fixtures, or 32 mA of loading, across no more than 200 feet of signal wire.
- Run the wire longer than that and signal strength falls off, which quietly reduces how many fixtures actually track the dimmer.
- The unit takes 120V AC and runs on 12 VDC at 0.5 A through a barrel connector.
- Two 2-position terminal connectors land the dimming signal wires, and one of them is a spare.
- Mounting the Grow Light Dimmer and What Ships With It
- Mount it on a wall near the fixtures rather than out by the door, because the signal-wire budget gets spent fast in a long room.
- Screws and drywall anchors come in the box.
- Keep it clear of the wet zone and anything that gets splashed during irrigation, and dry your hands before touching the buttons.
- Fluence rates it for spaces under eighty percent relative humidity, which rules out a lot of flower rooms at lights-out.
- A wall in a dry corridor outside the canopy is the usual answer.
- The LiPo backup battery holds the intensity setting through a short outage, so the room comes back where you left it instead of at full.
- This unit ships with its power cord, and Fluence has confirmed that the AC wall adapter is sold separately.
- That adapter is Fluence part DM2AA-DPA1BCMTAP, and without it the dimmer has no wall power.
- Growers running a combined power and dimming whip can skip it, since the fixture feeds the dimmer down the same cable.
- It is not a timer, so photoperiod still belongs to a contactor or an AC timer upstream.
- The dimming signal cable is a separate item too, and which one depends on whether the fixture takes M12 or M16.
- Dual Signal Output: Pushes either a 0-10V analog or a PWM signal, chosen with a switch on the housing.
- Digital Intensity Readout: Shows the exact set point instead of leaving you guessing at a dial position.
- Battery-Backed Setting: A LiPo cell holds your intensity level through a brief outage so nothing resets to full.
- Chain Capacity: Fluence rates a recommended 25 fixtures at 32 mA of loading over 200 feet of signal wire.
- Wall-Mount Hardware Included: Screws, drywall anchors and two terminal connectors ship in the box, one of them a spare.
- Fluence Fixture Compatibility: Works with SPYDR 1 and 2, VYPR 3, RAY, RAZRm, RAZRx and RAZR 2 through 4.
- Technical Specifications
Specifiche
- Model
- Fluence Whisper 2.0 Dimmer (AC/DC)
- Dimming Signals
- 0-10V ±0.1V or PWM 0-100% ±1%
- Dimming Range
- 0-100% light intensity
- Recommended Fixture Count
- 25 units (32 mA, 80% max loading)
- Input Power
- 120V AC, 60 Hz
- Dimensions
- 3.92 in L x 3.43 in W x 1.35 in H
- Weight
- 5 oz (142 g)
- Operating Humidity
- Below 80% RH
- Fixture Compatibility
- SPYDR 1, SPYDR 2, VYPR 3, RAY, RAZRm, RAZRx, RAZR 2/3/4
- Dual Signal Output
- Pushes either a 0-10V analog or a PWM signal, chosen with a switch on the housing.
- Chain Capacity
- Fluence rates a recommended 25 fixtures at 32 mA of loading over 200 feet of signal wire.
- Wall-Mount Hardware Included
- Screws, drywall anchors and two terminal connectors ship in the box, one of them a spare.
- Fluence Fixture Compatibility
- Works with SPYDR 1 and 2, VYPR 3, RAY, RAZRm, RAZRx and RAZR 2 through 4.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Heat Mat Thermostat Temperature Controller
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.