이 콘텐츠는 현재 원어로 제공됩니다.
컨트롤러 및 계량기도매 문의
PhotonTek Digital Lighting Controller
모델/SKU: PTK-DIGITAL-LIGHTING-CONTROLLER
The PhotonTek Digital Lighting Controller is a dual-zone control platform designed to automate compatible PhotonTek LED fixtures across residential, commercial, and multi-room horticultural installations.
- Power Dimming Range
- 10%–100% in 1% Increments
- Power Regulation Accuracy
- 1%
- Power Adapter Input
- 100–277V AC, 50/60Hz
- Power Adapter Output
- 5V DC, 2A
출처 참조 가격KRW 372,760
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
The PhotonTek Digital Lighting Controller is a dual-zone control platform designed to automate compatible PhotonTek LED fixtures across residential, commercial, and multi-room horticultural installations.
Product details
- Using a standard 0–10V control signal, it centralizes light scheduling, intensity adjustment, temperature protection, and simulated sunrise and sunset operation from one compact interface.
- The controller features two independent channels, identified as Zone A and Zone B.
- Each zone can operate up to 50 compatible PhotonTek LED fixtures, allowing one controller to manage as many as 100 fixtures in total.
- The zones may be assigned to separate rooms, different production stages, or different PhotonTek driver wattages.
- For example, Zone A may control a group of 600W fixtures while Zone B independently controls 465W or 1000W fixtures.
- This dual-zone architecture provides commercial facilities with greater flexibility than a single-output lighting controller.
- Light intensity can be regulated from 10% to 100% in 1% increments, with a separate 0% setting for switching fixtures off.
- This provides substantially finer adjustment than the fixed output settings supplied with standard manual dimmers.
- The controller supports complete 24-hour scheduling with up to six programmed switching or dimming events per zone.
- Operators can define specific times for fixtures to switch on, change intensity, or turn off, creating a repeatable lighting schedule without daily manual adjustment.
- Simulated sunrise and sunset periods can be configured from 0 to 30 minutes.
- During these transitions, fixture output gradually increases from the minimum dimming level to the selected operating intensity, then reverses before the scheduled lights-off time.
- Two included 16-foot temperature probes independently monitor Zone A and Zone B.
- If ambient temperature exceeds a selected threshold, the controller can automatically reduce fixture output.
- A second safety threshold can switch the connected fixtures off entirely if the temperature continues to rise.
- After a temperature-triggered shutdown, the restart delay can be set from 0 to 30 minutes in five-minute increments.
- This prevents fixtures from immediately restarting before environmental conditions have stabilized.
- The controller retains programmed settings, including time, date, intensity schedules, and temperature parameters, if power is temporarily disconnected.
- Its front display provides real-time information for both zones, while status LEDs indicate fixture operation, temperature-probe status, automatic dimming, and safety shutdown conditions.
- The included control cables connect the controller directly to the first compatible fixture in each zone.
- Additional fixtures are connected in series using separately available PhotonTek control link cables.
- The controller is compatible with PhotonTek controllable LED drivers and should not be connected to unsupported equipment.
- Compact enough for wall mounting, the controller measures approximately 4.92" × 3.14" × 0.98" and weighs only 9.88 ounces.
- It is supplied with a universal 100–277V AC power adapter, two temperature probes, two fixture-control cables, and mounting hardware.
- Dual-Zone Lighting Control
- Zone A and Zone B operate independently from one central interface.
- Each zone can control a different room, production stage, or compatible PhotonTek driver wattage, allowing separate schedules, intensity settings, and temperature safeguards.
- Controls Up to 100 Fixtures
- Each channel supports as many as 50 compatible PhotonTek LED fixtures.
명세서
- Model
- Digital Lighting Controller
- Controller Type
- Dual-Zone 0–10V LED Lighting Controller
- Compatible Drivers
- PhotonTek Controllable LED Drivers
- Power Dimming Range
- 10%–100% in 1% Increments
- Power Regulation Accuracy
- 1%
- Scheduled Events
- Up to 6 per Zone per 24 Hours
- Temperature Safety Dimming Range
- 0°C–40°C / 32°F–104°F
- Temperature Safety Shutdown Range
- 10°C–50°C / 50°F–122°F
- Sunrise and Sunset Duration
- 0–30 Minutes
- Temperature Probes
- 2 Included
- Temperature Probe Length
- 16' / 5 m
- Fixture Control Cable Length
- 16' / 5 m
- Power Adapter Input
- 100–277V AC, 50/60Hz
- Power Adapter Output
- 5V DC, 2A
- Controller Dimensions
- 4.92" × 3.14" × 0.98"
- Weight
- 9.88 oz
- Operating Temperature
- -20°C to 40°C
- Operating Humidity
- 20%–90%, Non-Condensing
- Ingress Protection
- IP20
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.