Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise
KENNIS VERGROTEN

Grow Genius System Support

Before submitting, please go through these 3 quick checks

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Grow Genius System Support

Before submitting, please go through these 3 quick checks

Check your connection setupWe’ve summarized the most common connection methods — please refer to the diagram for guidance.Here are two important details to double-check:

If you're using a G Series or SE Series grow light (with a display dimmer box):One end of the RJ12 cable should go into the UP port on the left side of the dimmer box (when facing it), and the other end should plug into the Light port of the Light & Clip Fan Combo Adapter.

The Light & Clip Fan Combo Adapter has 4 ports:One for the light, and one for the clip fan — be sure not to mix them up.

Make sure all firmware is up to date

Outdated firmware may cause connectivity or control issues. Please verify the following versions:

If you're using older versions, please update before submitting an issue.

Check your Wi-Fi signal strengthWeak or unstable network connections (e.g. in basements or garages) can affect device performance.Try testing your phone's Wi-Fi signal in the grow area — a strong and stable connection helps ensure proper operation.

GGS Power Strip Operating Manual>>>

GGS Controller Operating Manual >>>

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.