A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Controllers & MetersWholesale inquiry

Bluelab Pro Controller Wi-Fi

Model / SKU: 716489

What the Bluelab Pro Controller Wi-Fi Holds to Setpoint

Power Supply
100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A
pH Range / Accuracy
0.0 - 14.0 / ±0.1 @ 25°C
Temperature Range
0-50°C / 32-122°F
Probe Cable Length
2 m (6 ft)
Source reference priceUSD 1,499.00

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

What the Bluelab Pro Controller Wi-Fi Holds to Setpoint

Product details

  • Three parameters, and you can run one, two or all three.
  • It reads pH across 0.0-14.0 at ±0.1 and conductivity from 0 to 5.0 EC at ±0.1.
  • Temperature covers 0-50°C / 32-122°F.
  • It then doses to bring each parameter back to the value you programmed.
  • Dosing intervals are yours to tune against pump size, tank volume and stock dilution, which keeps a small tank from overshooting.
  • It runs on a 100-240 VAC supply, so it is not fussy about the panel it lands next to.
  • Every probe is removable and replaceable, on 2 m cables.
  • Running an Automatic pH and EC Controller Without Getting Burned
  • The safety logic is the part worth paying for.
  • High and low alarms sit on each parameter.
  • Internal lockouts stop nutrient dosing when a temperature alarm fires.
  • An external terminal lets a flow switch kill all dosing when the pump is idle.
  • Automatic lockouts also stop dosing outright if the unit detects a fault.
  • Set your lockouts before your setpoints.
  • The pH probe carries a calibration quality indicator, so you know when it is drifting rather than finding out through a crop.
  • Two things to budget for.
  • The controller does not include the dosing pumps, so a Peridoser or Solenoid is a separate line item.
  • A Bluelab Connect Stick is included.
  • Controls pH, conductivity and temperature: Run one parameter or all three, each with its own high and low alarm and its own setpoint.
  • Tunable dosing intervals: Match dose length to pump size, tank volume and stock dilution so a small reservoir does not overshoot.
  • Layered safety lockouts: Internal, external and automatic fault lockouts stop dosing before a stuck pump becomes a dead crop.
  • Replaceable probes on 2 m cables: pH connects by BNC, and every probe comes off individually rather than forcing a whole-unit swap.
  • Bluelab Connect Stick included: Data logs and remote monitoring through Bluelab Connect without a separate stick.
  • Technical Specifications

Specifications

pH Range / Accuracy
0.0 - 14.0 / ±0.1 @ 25°C
Temperature Range
0-50°C / 32-122°F
Power Supply
100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A
Probe Cable Length
2 m (6 ft)
Connectivity
Wi-Fi, Bluelab Connect (stick included)
Dosing Compatibility
Bluelab Peridoser and Solenoid dosing systems
Bluelab Connect Stick included
Data logs and remote monitoring through Bluelab Connect without a separate stick.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.