A brighter way to grow. Factory-direct wholesale. 15+ years of growing expertise
Controllers & MetersWholesale inquiry

Growlink Batch TankLINK pH Sensor

Model / SKU: GL-LINK-PHSENSOR

Reading Acidity with the Growlink Batch TankLINK pH Sensor

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Source reference priceUSD 79.99

For comparison only. Request your current wholesale price, availability and delivery terms.

No payment required. A conversation about what you need.

Factory-direct support15+ years of experience
A CLOSER LOOK

A little more about this product

Reading Acidity with the Growlink Batch TankLINK pH Sensor

Product details

  • The Growlink Batch TankLINK pH Sensor reads nutrient solution acidity inside a batch tank or reservoir in real time.
  • The probe covers the full 0–14 pH range at ±0.02 pH accuracy with 0.01 pH resolution.
  • A 10-foot cable runs from the sensor to the Batch TankLINK controller.
  • The cable terminates on a BNC connector that pushes onto the controller port.
  • A quarter-turn clockwise locks it in place.
  • Inside the typical hydroponic feed window of 5.5–6.5 pH, that accuracy is tight enough to confirm a fresh batch lands inside spec on the first mix.
  • Calibrating and Maintaining the TankLINK pH Probe
  • Calibration is a two-point process with pH 7.00 and pH 4.01 buffer solutions.
  • The TankLINK LCD wizard walks the probe through each buffer in turn and locks the cal at a stable voltage.
  • Run cal at the start of each batch or whenever the reading drifts past ±0.05 pH between known mixes.
  • The pH probe ships in a storage cap of pH 4 buffer and potassium chloride.
  • The membrane needs to stay wet between runs.
  • A dry membrane is the fastest way to kill a pH probe early.
  • Keep the storage cap on whenever the sensor sits out of solution.
  • Plug-and-play wiring keeps a single-probe swap during teardown under a minute.
  • The nutrient tank pH probe twists out of the BNC port and a fresh one twists in.
  • 0–14 pH Range: Full-scale read covers anything a hydro feed will ever hit, including post-dosing spikes.
  • ±0.02 pH Accuracy: Tight enough to confirm fresh mixes land in the 5.5–6.5 feed window on the first measurement.
  • 0.01 pH Resolution: Catches small drifts between feeds before they show up as canopy stress symptoms.
  • BNC Connector with 1/4-Turn Lock: Push-on, twist-lock fit on the TankLINK controller's labeled port — no rewiring at swap.
  • Two-Point Calibration: pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.
  • Technical Specifications

Specifications

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Compatible Controller
Growlink Batch TankLINK
Two-Point Calibration
pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.

Let’s make it work for your project

Include your quantity, delivery destination, growing area and any voltage or plug requirements in your inquiry. Specifications, availability, shipping and warranty terms are confirmed in your written quotation.

LET’S GROW TOGETHER

Questions & discussion

0

Have a question or something useful to share? Start the conversation.

KEEP EXPLORING

More possibilities for your space

View all products
THE START OF SOMETHING GOOD

Let’s bring your project to light.

Tell us a little about what you need. We’ll use your details to prepare a relevant wholesale response.

Your product list

No payment. No obligation. Just a helpful conversation.